澳门新葡亰登录,澳门新葡亰登录入口

高效过滤器,初效过滤器厂家
澳门新葡亰登录入口

高效过滤器报费后拆换规定

2019-10-11 文章来源:www.solidregistry.com 编辑:过滤器厂家 280
洁净区部分高效过滤器进行更换时,用干净的抹布清洁高效空气过滤器的静压箱,然后,打开高效空气过滤器内包装,将密封条粘贴到高效空气过滤器的进风侧,平稳的把过滤器放入静压箱内,搬运时一定注意轻拿轻放,并记录过滤器规格型号、编号及安装位置.固定过滤器时,先检查过滤器在静压箱的中间,过滤器与静压箱四周离距相当,固定件应对角固定,防止受力不均或损坏过滤器.静压箱内固定螺母应旋紧,使过滤器与静压箱之间的连接吻合且密封.然后开启空调机组,对系统进行通风后,打开过滤器内包装,按以上步骤进行更换.

When replacing some high-efficiency filters in the clean area, clean the static pressure box of the high-efficiency air filter with a clean cloth. Then, open the packing inside the high-efficiency air filter, paste the sealing strip on the air inlet side of the high-efficiency air filter, and place the filter in the static pressure box smoothly. When handling, pay attention to handle it lightly, and record the specifications, types, numbers and installation positions of the filter. When the filter is in the middle of the static pressure box, the distance between the filter and the surrounding of the static pressure box is equal. Fixed parts should be fixed at an angle to prevent uneven force or damage to the filter. Fixed nuts in the static pressure box should be tightened to make the connection between the filter and the static pressure box coincide and seal. Then open the air conditioning unit, after ventilating the system, open the packaging in the filter and replace it according to the above steps.

装好高效过滤器后,运行系统,检查有无漏风.当发现有漏风时,做如下处理:紧固固定件或更换密封条并重新安装,高效空气过滤器本身漏风,则需要更换新的高效空气过滤器.接下来,安装高效空气过滤器面板,安装时,按原标记好的方向安装,面板与顶棚的连接处尽量减少空隙,防止灰尘积聚.高效空气过滤器安装后,应重新进行环境检测,并做验证,为下次确定高效空气过滤器报废提供可靠的依据.

After installing the high-efficiency air filter, the operating system checks whether there is air leakage. When air leakage is found, the following treatment should be done: fastening fixtures or replacing sealing strips and re-installing. If the high-efficiency air filter itself leaks, a new high-efficiency air filter should be replaced. Next, install the panel of the high-efficiency air filter. When installing, install the panel in the direction marked before, and minimize the emptiness at the connection between the panel and the ceiling. Clearance, prevent dust accumulation. After installation of the high-efficiency air filter, the environment should be re-examined and verified to provide a reliable basis for the next determination of the abandonment of the high-efficiency air filter.

网站地图
电话咨询
邮件咨询
在线地图
QQ客服
XML 地图 | Sitemap 地图